Leon Mk1
| Assembly diagram |
| For vehicles fitted with a security valve on the active carbon filter exterior; Security valve: verification and fitting position → Chapter. |
| 1 - | Connector |
| 2 - | Solenoid valve 1 -N80- |
| q | Valve closed with ignition switched off |
| q | When the engine is warm the valve will be activated from the engine control unit (pulsed) |
| q | Checking: → Rep. Gr.01 |
| 3 - | Support |
| q | On the lower part of the filter |
| 4 - | Attachment ring |
| 5 - | Injection unit |
| 6 - | Breather pipe |
| q | From the gravity/overfill valve on the fuel tank → Item |
| q | In some vehicles, we may find a security valve inserted next to the active carbon filter. |
| 7 - | Active carbon filter system |
| q | Location: on the front right wheel housing |
| q | For removal: unlock the securing tab in the -direction of the arrow- and push the filter downwards |
