t
| Compression gauge -V.A.G 1381- or -V.A.G 1763- |
l
| Engine oil temperature, at least 30 °C |
–
| Remove the spark plugs using the spanner -A-52201-. |
–
| Remove the connector for the revolution sender (depending on the version). |
–
| Extract the connector for the Hall sender (ignition distribution). |
–
| Ask a second mechanic to press the accelerator pedal to the floor. |
–
| Check compression with compression tester -V.A.G 1381- or -V.A.G 1763-. |
Note See relevant test unit operating instructions for instructions on how to use test unit. |
–
| Operate starter until tester shows no further pressure increase. |
Tolerable difference between all cylinders: 3 bar |
|
|
|