Leon Mk1
Assembly overview - fuel delivery unit, fuel gauge sender and suction jet pump |
1 - | Fuel line |
q | For metering pump -V54- |
2 - | Fuel return line |
q | Blue colour |
q | From fuel filter. |
q | Check for secure seating. |
3 - | Fuel supply line |
q | Black |
q | Check for secure seating. |
4 - | Electric connector |
q | For fuel delivery unit. |
5 - | Electric connector |
q | For fuel gauge sender -G- |
6 - | Locking ring, 145 Nm |
q | Remove and install using wrench -T10202-. |
q | Check for secure seating. |
7 - | Flange |
q | For fuel delivery unit. |
q | For fuel gauge sender -G- |
q | Always renew flange seal. |
q | Note fitting position on fuel tank → Fig. |
8 - | Suction line |
q | With suction-jet pump. |
q | Clipped onto fuel tank |
q | Removing and installing → Chapter. |
9 - | Fuel delivery unit |
q | Removing and installing → Chapter. |
q | Note fitting position on fuel tank → Fig. |
q | With fuel level indicator sender -G- |
q | Clean strainer if dirty |
10 - | Seal |
q | Replace |
q | When installing, fit dry in fuel tank opening. |
q | Moisten with fuel only when installing flange. |
11 - | Fuel gauge senders -G- |
q | Removing and installing fuel gauge sender -G- → Chapter. |