–
| At a distance -a- = 770 mm from end of extraction hose of fuel extractor -VAS 5190-, use insulating tape to mark -arrow- the hose. |
Note The extraction hose has been properly inserted when the affixed mark is level with the edge of the filler neck. |
–
| Push hose into fuel filler neck and extract fuel. |
Note t
| When no more fuel is extracted, the tank is emptied just enough for the sender flange to be opened without danger. The tank may be removed while containing remaining fuel. |
t
| If work has to be done on fuel pump or fuel gauge sender -G-, proceed as follows: |
|
|
|