seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Assembly mountings > < Engine: fitting

Leon Mk1

Supporting engine in installation position
Supporting engine in installation position
Special tools and workshop equipment required
   
t  Support bracket -U-30025F-
Setting up support bracket:
  L00-10309

–  Remove plenum chamber cover → Rep. gr.50.
–  Fit the support bracket -U-30025F- with the necessary adapters and attach as shown in the figure, and retain the motor in its fitting position.
  Note
   
The Adapter -U-30025/5B- of the support bracket must be inserted with the rubber blocks in the direction of the wing. Front application point in the area of the screw of the retaining plate of the front end.
–  Align the bracing device and tighten all bolts hand-.tight.
–  Insert hooks of spindles into the engine lifting eyes and brace engine in installation position.
  E15-10103

Assembly mountings > < Engine: fitting