seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Oil filter, engine oil cooler and oil pressure switch > < Chain drive
Engine oil
Engine oil
Oil capacity
With oil filter: 4.7 l
Without oil filter 4.2 l.
Engine oil specifications → Booklet701.
Change engine oil → Booklet701.
Engine oil level: check
  Note
The oil level must not be above MAX mark on dipstick - danger of damage to catalytic converter.
Test prerequisites
l  Engine oil temperature at least. 60 ℃
l  Vehicle in horizontal position
l  Wait a few minutes after switching off the engine to allow the oil to flow back into the sump.
Checking process:
–  Pull out the oil dipstick, clean it with a clean cloth and reinsert it fully.
–  Pull out the dipstick again and read off the oil level.
   
Markings on oil dipstick:
a - Do not top up oil.
b - Oil may be topped up.
c - oil must be added.
  Note
The oil level must not be above the max. marking -arrow  1- and not below the min. marking -arrow 2-.
  N17-0037

Oil filter, engine oil cooler and oil pressure switch > < Chain drive