–
| Attach lifting tackle -2024 A- as follows and lift from engine and gearbox jack -V.A.G 1383 A- using workshop crane -VAS 6100-. |
Pulley side: 3rd hole of the perforated flange in position 2 |
Flywheel end: 3rd hole of the perforated flange in position 8. |
Caution Use locking pins at hooks and locating pins. This prevents damage being caused to the engine or vehicle. |
|
t
| The positions numbered 1 ... 4 of the hoisting bar face the pulley. |
t
| The holes in the perforated flanges are counted starting from the hook. |
–
| Remove the dowel sleeves and secure the engine to the engine and gearbox support -VAS 6095-. |
|
|
|