Leon Mk1
2. Oil filter bracket - Assembly overview |
1 - | Screw plug, 15 Nm |
2 - | Oil seal |
q | In case of leakage, cut out and replace sealing ring |
3 - | Oil pressure switch -F1-, 1.4 Nm |
q | 25 Nm |
q | Black |
q | check → Chapter |
4 - | Oil seal |
q | In case of leakage, cut out and replace sealing ring |
5 - | Oil filter bracket |
q | With integrated non-return valve |
6 - | 15 Nm + 90° |
q | replace |
7 - | Oil filter |
q | Loosen using a spring-type clip or the oil filter spanner -3417- |
q | Tighten by hand |
q | Observe the installation instructions printed on the filter |
8 - | Screw plug, 40 Nm |
q | replace |
9 - | Oil seal |
q | cannot be lost rolled onto → Item |
10 - | Spring |
q | For pressure relief valve, approx. 4 bar |
11 - | Piston |
q | For pressure relief valve, approx. 4 bar |
12 - | Seal |
q | replace |
13 - | Oil non-return valve |
q | Integrated in the oil filter support |
q | Not available as a separate replacement part |
14 - | O ring |