SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4 cylinder Injection engine (Autogas) | Engine lubrication | Parts of lubrication system

Removing and installing oil pump

Removal:

–	Remove oil sump and baffle plate → Chapter.

–	Remove bolt -2-.

–	Take chain sprocket off oil pump shaft.

–	Unscrew bolts -1- and -3- and take oil pump off.

Installing

Installation is carried out in the reverse order; noting the following in the process:

–	Insert dowel sleeves → Item at top of oil pump.

The oil pump shaft and the chain sprocket can only be fitted in one position.

–	Fit the oil sump → Chapter.

Tightening torques

Component		Nm
Chain sprocket to oil pump shaft		20 Nm + 90° → Remark
Oil pump to cylinder block		15

¹⁾	Renew bolts

SEAT Workshop Service and Repair Manuals