seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Mixture preparation system, electronic inj.,Gas > < Fuel tank (Petrol)

Leon Mk1

Fuel level sender: removing and fitting
Fuel level sender: removing and fitting
Removal:
Perform the following work:
   
–  Unscrew bolts -arrows- and remove cover.
–  Liquified gas tank: Draining → Chapter.
  N24-10607
–  Remove the gas line -1- and the angle screw connection -2-.
–  Disconnect the plug connector to the Sender for the gas supply display -G707-.
  N20-10685
–  Remove bolts -arrows-.
–  Carefully remove the sender for the gas supply display from the fuel tank.
Installing
Installation is carried out in reverse order.
  N20-10687
Tightening torque of the bolts -arrows-: 9.7 Nm
  N20-10687

Mixture preparation system, electronic inj.,Gas > < Fuel tank (Petrol)