seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Components: check > < Checking components

Leon Mk1

Gas injector: Removing and installing
Gas injector: Removing and installing
  WARNING
Gas may escape when opening the gas line. Wear safety goggles and appropriate clothing to avoid injury to eyes and burns. Wind the separation point in a rag and open carefully.
–  Separate the plug connections from the gas injectors Gas injector 1 -N366-, Gas injector 2 -N367-, Gas injector 3 -N368- und Gas injector 4 -N369-.
   
–  Loosen the bolts -arrows-.
–  Remove the sheet plate covering and replace the defective gas injector.
Allocation of the gas injectors:
t  Gas injector 1 -N366- Cylinder 1
t  Gas injector 2 -N367- Cylinder 2
t  Gas injector 3 -N368- Cylinder 3
t  Gas injector 4 -N369- Cylinder 4
  N24-10603

Components: check > < Checking components