seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Mechanical exhaust gas recirculation valve: removing and fitting > < Connection schema for the solenoid valve block

Leon Mk1

Mechanical exhaust gas recirculation valve: check
Mechanical exhaust gas recirculation valve: check
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Manual pump -SAT 1390-, see equivalent → Anchor
Checking sequence
l  An actuator diagnosis has been completed.
  W00-2716
Engine cover (version 1):
–  Take out the oil dipstick -1- from its guide tube.
–  Lift the engine cover sideways -arrows 2- and extract to the front -arrow 3-.
–  Replace the oil dipstick in the guide tube.
  E10-10002
Engine cover (version 2):
–  Detach the outer -1- and inner -2- engine covers, by pulling them evenly upwards.
All vehicles (continued):
  E10-10038
–  Disconnect the vacuum hose from the mechanical exhaust gas recirculation valve.
–  Connect hand vacuum pump -SAT 1390- to valve.
–  Operate hand vacuum pump.
–  Disconnect the vacuum pump hose from the mechanical exhaust gas recirculation valve.
l  The valve should be heard to click closed. The membrane rod moves in the direction of the intake manifold.
  E26-10002

Mechanical exhaust gas recirculation valve: removing and fitting > < Connection schema for the solenoid valve block