Leon Mk1
Pre-wiring for injector-pump unit and glow plugs - general overview of installation |
1 - | Spark plug connection |
2 - | Steel retainer clips |
q | Do not bend |
3 - | Securing bolt |
q | Tighten to 10 Nm |
4 - | Adapter ring |
q | Ensure this is mounted in the correct position → Anchor |
5 - | Central connection |
q | Ensure this is mounted in the correct position → Anchor |
6 - | Electrical connector |
q | Two-pin |
q | For injector-pump units |
7 - | Cable duct |
q | Only remove / install together with → Item |