| –
| Install the pickup device -U-30035- as appears in the illustration. |
| –
| Lightly pretense the motor. Later, disassemble the motor support. |
| –
| Lower the motor a little. |
| –
| Disassemble the ribbed trapezoidal belt → Chapter. |
| –
| Disassemble the transmission pulley and the upper and lower parts of the toothed belt protection. |
| –
| Mark the forward direction of the toothed belt. |
| –
| Loosen the roller tensor and remove the toothed belt. |
|
|
|
