Adaptive values of the engine electronics control unit: erase
Adaptive values of the engine electronics control unit: erase
Special tools and workshop equipment required
t
Fault reader -V.A.G 1551- or vehicle system tester -V.A.G 1552- with cable -V.A.G 1551/3B-
Operation sequence
–
Connect the equipment -V.A.G 1551- (V.A.G. 1552). Then switch ignition on and select engine control unit with the “Address code” 01. (Fault reader: Connecting and selecting the engine control unit → Chapter.)
Display indication:
–
Operate the fault reader taking into account the message displayed on the screen:
–
Press keys 1 and 0 for the “Adaptation” function and confirm input with the Q key.
Rapid data transmission HELP
Select the function XX
Display indication:
–
Press the keys 0 and 0 for the channel number 0 and confirm with the key Q.