Leon Mk1
Assembly overview - hydraulic unit, brake servo/ brake master cylinder (left-hand drive) |
Note!
Pump and valve block must not be separated from one another. |
1 - | Brake servo |
2 - | Tandem brake master cylinder |
3 - | Brake fluid reservoir |
4 - | Cap |
5 - | Self-locking nut, 25 Nm |
6 - | Torx socket head bolt T25, 4 Nm |
7 - | Torx socket head bolt T25, 8 Nm |
8 - | Rubber damper |
9 - | Retainer |
10 - | ABS hydraulic unit |
11 - | Control unit |
12 - | Brake pipe connection |
q | Hydraulic unit to front right brake caliper |
13 - | Brake pipe connection |
q | Hydraulic unit to rear left wheel cylinder |
14 - | Brake pipe connection |
q | Hydraulic unit to rear right wheel cylinder |
15 - | Brake pipe connection |
q | Hydraulic unit to front left brake caliper |
16 - | Brake pipe |
q | Master brake cylinder/secondary piston circuit to hydraulic unit |
17 - | Brake pipe |
q | Brake master cylinder/primary piston circuit to hydraulic unit |