seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing trailing arm with mounting bracket|Installation > < Removing and installing trailing arm with mounting bracket

Leon Mk1

Removal:
Removal:
–  Remove wheel.
–  Remove coil springs → Chapter.
   
–  Loosen the bolt -arrow- holding the hand brake cable -1- to the longitudinal swinging arm -2-.
  A42-0430
–  Unbolt the link rod -arrow- from the longitudinal swinging arm.
–  Remove bolts -arrows-.
–  Mark the assembly position of the clutch pedal bracket on the bodywork.
  A42-0468
–  Remove bolts -arrows-.
–  Remove the longitudinal swinging arm with the clutch pedal bracket.
If the longitudinal arm needs replacing, the support bracket should be dismounted from the longitudinal bar.
In the event, the assembly position of the clutch pedal bracket with respect to the longitudinal swinging arm should be adjusted.
  A42-0431
Fixing the assembly position of the clutch pedal bracket with respect to the longitudinal swinging arm
The spacing -a- is 34 mm.
1  - Mounting bracket
2  - Trailing arm
–  Tighten bolt when dimension -a- is set.
  A42-0448

Removing and installing trailing arm with mounting bracket|Installation > < Removing and installing trailing arm with mounting bracket