Leon Mk1
| Airbag unit on driver side: removing and fitting |
| 1 - | Steering wheel |
| q | Removing → Chapter |
| 2 - | Connector |
| 3 - | Airbag unit |
| 4 - | Hexagonal bolt |
| q | Must always be replaced |
| q | 40 Nm |
| 5 - | Torx screw T30 |
| q | 8 Nm |
| q | Must always be replaced |
| 6 - | Lower part of the covering |
| 7 - | Rubber foam tube |
| 8 - | Connector |
| 9 - | Retractor ring with collector ring |
| q | Removing → Chapter |
| – | Disconnect the battery earth strap. |
| – | Put the steering wheel → Item in its centre position (with the wheels straight). |
| – | Loosen the Torx screw T30 → Item. Remove the airbag → Item from the steering wheel, and disconnect the red connector → Item from the airbag. |
| Assembly notes: |
| – | Switch on ignition. |
WARNING
|
| – | Connect the battery earth strap. |
