Leon Mk1
Assembly overview: Steering column, left-hand drive |
Note
t | It is not permitted to carry out welding and straightening operations on load-bearing or wheel-guiding suspension components. |
t | Always replace self locking nuts following their removal. |
t | Always renew corroded nuts and bolts. |
1 - | Assembly carrier with mounting bracket |
2 - | Steering column |
q | removing and installing → Chapter |
3 - | Bolt. |
q | 20 Nm |
q | Observe tightening sequence → Anchor. |
4 - | Bolt. |
q | 20 Nm |
q | Observe tightening sequence → Anchor. |
5 - | Crash bar for brake pedal |
q | Assignment → Electronic parts catalogue „ETKA“ |
6 - | Crash bar for clutch pedal |
q | Assignment → Electronic parts catalogue „ETKA“ |
7 - | Bolt. |
q | 30 Nm |
q | Always renew if removed |