Leon Mk1
Repairing front suspension strut |
1 - | Gas-filled shock absorber |
q | Can be renewed individually. |
q | Allocation → Electronic Parts Catalogue “ETKA”. |
2 - | Bump stop |
3 - | Protective sleeve |
q | Pull over protective cap on shock absorber and lock into place. |
4 - | Coil spring |
q | Start of spring must rest on stop -arrow- on lower spring plate → Item |
q | Observe colour coding. |
q | Surface of spring must not be damaged. |
q | Allocation → Electronic Parts Catalogue “ETKA”. |
5 - | Spring plate |
6 - | Deep groove ball thrust bearing |
7 - | Suspension strut mounting |
8 - | Hexagon nut, 60 Nm |
9 - | Top insulator |
10 - | Self-locking hexagon nut, 60 Nm |
q | Fitting and removing → Fig.. |
q | Renew each time after removing. |
|