seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Instructions for tow starts and when towing > < Safety functions of the gearbox control unit
Added information concerning the semi-automatic gearbox 02E
Added information concerning the semi-automatic gearbox 02E
Gearbox
The semi-automatic gearbox 02E is also known as the dual clutch gearbox. Engine torque is transmitted to the gearbox through the dual-mass flywheel. The gearbox has the same structure as a manual 6-speed gearbox. The gearbox functions as an automatic gearbox through the alternating hydraulic control of the wet multi-disc clutches, that is, the gears engage automatically, or manually in Tiptronic mode. There is no clutch pedal. For further information the corresponding → auto-didactic programme should be consulted.
Safety functions of the gearbox control unit
If one or more components or sensors stop working, the gearbox control unit activates the corresponding replacement functions or the relevant emergency programmes. This ensures the continued working of the gearbox without risk of damage, nor of repercussions to the working and quality of the gear shifts. For further information the corresponding → auto-didactic programme should be consulted.
Gearbox action:
The position of the selector lever is no longer transmitted to the gearbox mechanically through the selector lever cable and the multifunction switch (gearspeed sensor), as is the case with the automatic gearbox. The positions of the selector lever or the gear shifts are sent to the gearbox control unit using its own control unit located in the gear selection mechanism, through the CAN bus. That is, the gears are changed without using a lever cable. Only when the selector lever is in “P” does the parking block engage mechanically using the selector lever cable.
Gear oil
The levels of gear oil in the gearbox and in the front final group are checked and topped up together → Chapter.
t  Only the recommended gear oil should be used for semi-automatic gearbox 02E. The use of other types of oil may cause damage to the working of the gearbox, part no. → Chapter.
Regulations for oil waste management
Used oils should be taken to an appropriate centre for their correct disposal.
t  Used oils pollute the environment when not correctly disposed of.
t  It is forbidden to mix this oil with solvents, brake or coolant liquids.
t  Always follow the instructions shown on the oil container.
Modifications in the shift points, up and down
When shifting up or down, the gearshifts are automatically selected using the possible range of gear shifts according to the position of the accelerator pedal and the speed of travel.
l  The possible range of a gear change will be adapted for maximum engine power during extreme ascents.
l  The possible range of a gear change will be adapted for maximum engine braking power during extreme descents
l  The braking effect of the engine may also be used to advantage by directly selecting a particular gear using the Tiptronic system, for example, when travelling with trailers on slopes.
   

Instructions for tow starts and when towing > < Safety functions of the gearbox control unit