seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Distinctive letters for engines, ratios > < Conversion table by relevance

Leon Mk1

  • Semi-automatic gearbox 02E
  • Technical data
  • Gearbox identification

Gearbox codes: preview
Gearbox codes: preview
   
On some gearboxes, the engine code is located on the upper part near the gear selection lever control cable, or on the rim of the joint between the two housings -arrows- .
–  Remove engine cover → Booklet2.
–  Remove the air filter housing, the air hose and the conduit → Rep. Gr.24 and → Rep. Gr.23.
Observe the identifying letters: when they are under the gearbox console
–  Remove engine cover → Booklet2.
–  Remove the air filter housing, the air hose and the conduit → Rep. Gr.24 and → Rep. Gr.23.
–  Remove battery → Electrical system; Rep. Gr.27.
  N00-10138
–  Remove battery platform -arrows-.
  A10-1572
–  Position bracket -U-30025E- on bolted flange for wing panels.
–  Next, separate the hoses and cables that may be in the area of the engine where the rings that grip the support -U-30025E- go.
–  Place eyes onto spindle hooks.
–  Slightly tension the engine assembly/gearbox via the spindles.
  E13-10016
–  Unscrew the bolts -1- and -2- from the console -A- .
–  Move the gearbox slightly downward by loosening the spindle on the support -U-30025E- until the console can be removed -arrow-
Install in reverse order. The following must be taken into account:
  A37-0653
–  Replace the bolts -1 and 2- of the → Rep. Gr.10.
  A37-0653

  • Semi-automatic gearbox 02E
  • Technical data
  • Gearbox identification

Distinctive letters for engines, ratios > < Conversion table by relevance