seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Safety functions of the gearbox control unit > < Filling amounts
Safety measures
Safety measures
If test and measuring instruments are required during a test drive, observe the following points:
  WARNING
t  The testing and measurement equipment must always be fitted to the rear seat and from there be operated by a second person.
t  If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.
To avoid injury to individuals and/or the destruction of electric and electronic components, the following should be observed:
t  Disconnect and connect test and measurement equipment only when the ignition is switched off.
  WARNING
t  Observe the necessary precautions when disconnecting the battery → Electrical system; Rep. Gr.27.
t  The battery should only be disconnected and connected when the ignition is switched off, otherwise the gearbox control unit may be damaged.
   

Safety functions of the gearbox control unit > < Filling amounts