seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Renewing luggage compartment lightW3 bulb > < Luggage compartment lightW3
Removing and installing luggage compartment lightW3
Removing and installing luggage compartment light -W3-
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
t  When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
t  Removal and installation of the luggage compartment light is described for the left-hand side only.
t  Removal and installation of the luggage compartment light on the right-hand side is basically the same.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
  W00-0016
–  Lever out light -1- from luggage compartment trim using removal wedge -VAS 3409- or screwdriver.
  N96-10886
–  Release and separate connector -arrow- and remove luggage compartment light -W3-.
Installing:
Installation is carried out in reverse order.
  N96-10155

Renewing luggage compartment lightW3 bulb > < Luggage compartment lightW3