seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear lid lock unitF256 > < Removing and installing luggage compartment lightW3
Renewing luggage compartment lightW3 bulb
Renewing luggage compartment light -W3- bulb
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove luggage compartment light -W3- → Chapter.
  W00-0016
–  Remove contact plate -1- of light by pressing outwards and remove festoon bulb -2- from bulb holder.
–  Festoon bulb: 12 V, 10 W
Installing:
Installation is carried out in reverse order.
  N96-0393

Rear lid lock unitF256 > < Removing and installing luggage compartment lightW3