SEAT Workshop Service and Repair Manuals > Leon Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Lights and switches in roof trim | Removing and installing front passenger side illuminated vanity mirrorW14 and driver side illuminated vanity mirrorW20 | Removing and installing front passenger side illuminated vanity mirrorW14 and driver side illuminated vanity mirrorW20

Removing and installing front passenger side illuminated vanity mirrorW14 and driver side illuminated vanity mirrorW20

Removing and installing front passenger side illuminated vanity mirror -W14- and driver side illuminated vanity mirror -W20-

Special tools and workshop equipment required

t	Removal wedge -VAS 3409-

Note

t	When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.

t	The procedure for removal and installation of both lights is the same and is therefore described for just one light.

Removing:

–	Switch off ignition and all electrical loads, and pull out ignition key.

–	Carefully lever light out of headliner using removal wedge -VAS 3409- or suitable screwdriver.

–	Release and detach connector -arrow- and remove light.

Installing:

Installation is carried out in reverse order.