seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Lights and switches in centre console > < Removing and installing front passenger side illuminated vanity mirrorW14 and driver side illuminated vanity mirrorW20

Leon Mk1

Renewing illuminated vanity mirror bulb
Renewing illuminated vanity mirror bulb
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
t  When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
t  The procedure for removal and installation of both lights is the same and is therefore described for just one light.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove illuminated vanity mirror bulb → Chapter.
  W00-0016
–  Press contact plate -1- of light in direction of arrow and remove festoon bulb -2- from bulb holder.
–  Festoon bulb: 12 V, C5W
Installing:
Installation is carried out in reverse order.
  N96-0393

Lights and switches in centre console > < Removing and installing front passenger side illuminated vanity mirrorW14 and driver side illuminated vanity mirrorW20