SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
General description of the immobilizer 01.2007? >
< Interior monitor send and receive module?1G303: Removing and installing
Leon Mk1
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Ultrasonic interior monitor:
Removing and installing alarm hornH12
Removing and installing alarm hornH12
Removing and installing alarm horn -H12-
Removal:
–
Switch off ignition and all electrical consumers and take out ignition key.
–
Remove side trim (right-side)
→ Rep. gr.70
.
–
Unscrew the nut
-1-
.
–
Disconnect the electrical connector
-2-
.
–
Remove the Alarm horn -H12-
-item 3-
.
–
Unscrew bolt
-4-
to remove bracket for alarm horn
-5-
.
Installation
Installation is carried out in reverse order, noting the following:
–
Fit side trim (right-side)
→ Rep. gr.70
.
Tightening torques
Components:
Nm
Alarm horn -H12- to bracket
5
Bracket for alarm horn to body
9
Vehicle electrics
Electrical system
Lights, lamps, switches inside, anti-theft system
Ultrasonic interior monitor:
Removing and installing alarm hornH12
General description of the immobilizer 01.2007? >
< Interior monitor send and receive module?1G303: Removing and installing