–
| When installing the braket -1-, observe the tightening sequence for the fixing screws: |
–
| First tighten the fixing screws -arrows A- and then tighten the fixing screws -arrows B- to the specified tightening torque → Chapter. |
–
| Control the headlight position. The clearance with respect to the bodywork should be even. |
If the headlight shows irregular gaps with respect to the bodywork, correct the instalölation position → Chapter. |
–
| After setting the gap, tighten the screws using the adjustment socket -2-. → Chapter |
Note If a headlamp is removed, it must always be adjusted after installing. |
–
| Check the adjustment of the headlamp and adjust the headlamp when necessary „maintenance to be considered precisely“; → Booklet701. |
|
|
|