seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear left vehicle level sender G76 on rear axle > < Removing and installing control unit for gas discharge lamp bulb and headlight range control

Leon Mk1

Removing and installing front left vehicle level senderG78 on front axle
Removing and installing front left vehicle level sender -G78- on front axle
  Warning
If the vehicle level sender is removed, after reinstallation the basic setting of the headlight must be performed and the headlight must be set using a headlight setting unit → Chapter.
The front left vehicle level sender -G78- is secured on the anti-roll bar under the noise insulation tray.
The sender is not adjustable, a default setting is predetermined during construction.
Removing:
–  Remove noise insulation tray.
   
–  Remove securing bolts -arrows-.
–  Remove sender.
–  Pull off connector for voltage supply.
Installing:
Install in reverse order of removal.
–  Adjusting headlights with gas discharge bulb → Chapter.
  N94-0508

Removing and installing rear left vehicle level sender G76 on rear axle > < Removing and installing control unit for gas discharge lamp bulb and headlight range control