SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Windscreen wipe/wash system >
< Removing and installing poly V-belt pulley without freewheel
Leon Mk1
Vehicle electrics
Electrical system: General information / Starter-current supply-CC
Pulley for Poly-V belt with free sprocket: removing and fitting
Pulley for Poly-V belt with free sprocket: removing and fitting
Pulley for Poly-V belt with free sprocket: removing and fitting
Special tools and workshop equipment required
t
Adapter -3400-
t
8 mm hexagon socket or TORX T50 socket
Removal:
–
Remove alternator
→ Electrical system; Rep. gr.27
.
–
If fitted, press off protective cap on alternator pulley.
–
Retain pulley with multi-tooth adapter -3400- and rotate alternator shaft clockwise, in order to release it.
Installation
Installation is carried out in reverse order, noting the following:
–
Turn alternator shaft anti-clockwise to tighten.
–
Clip in the protective cap to the belt pulley of the alternator.
Tightening torque
Components:
Nm
Poly-V belt pulley with free-wheel to alternator
80
Vehicle electrics
Electrical system: General information / Starter-current supply-CC
Pulley for Poly-V belt with free sprocket: removing and fitting
Windscreen wipe/wash system >
< Removing and installing poly V-belt pulley without freewheel