Connecting the central diagnosis -VAS - |
Note Installation location of the diagnosis connector of the different models is described in the manual Electric System Rep. Gr. 97 of the respective vehicle. |
Connecting vehicle diagnostic tester -VAS -: |
–
| In vehicles with automatic gearbox, set selector lever in position „P“ or „N“. |
–
| In vehicles with manual gearbox put the gear lever in neutral. |
–
| With the ignition switched off, connect the vehicle diagnosis tester -VAS - to the diagnostic terminal on the vehicle. |
The following processes are performed with this test program: |
t
| System test for online connection |
t
| Check of user authorization |
t
| Test of correct connection to SEAT database |
Prerequisite: tester must have an online connection (network connection): |
Connecting vehicle diagnostic tester -VAS - |
–
| Select the operating mode „Guided fault finding“ on vehicle diagnosis tester -VAS -. |
–
| Using „GoTo“ button, select „Functions/component“ and then the following menu options in succession: |
t
| Diagnostic capable systems |
Note t
| All the described work instructions, such as adaptations and coding, may be carried out using the vehicle diagnosis tester -VAS -. |
t
| All the work instructions are available in the operational modes„Guided fault location“ y „Guided functions“. |
t
| Observe the latest operating instructions for vehicle diagnosis tester -VAS - and successor models, which are displayed after selecting the „Administration“ and „Operating Manual“ keys. |
|
|
|