The information on screen on the faults is not updated constantly, but only when the self-diagnosis is started or function 05 is executed “Clear fault memory”.
–
Turn on the printer with the Print key (the warning light comes on).
Indication on the display:
–
Press keys 0 and 2. (02 is used to select the function “Consult fault memory”).
Fast data transmission HELP
Select function XX
Indication on the display:
–
Confirm the entry with Q.
Fast data transmission Q
02 - Consult fault memory
The display shows the number of faults memorised.
The faults memorised are shown and printed at the same time.
–
With the fault printed, you have to pass to the fault table and eliminate the fault concerned. → Chapter
X faults detected
If “No fault detected” appears, on pressing → the program returns to its initial position.