Note | t
| Never remove a storage device while the USB port is active, as it may damage the support. |
| t
| Do not connect an MP3 player directly to the USB port, as it may damage the connector. Always use a USB extension cable. |
| t
| Only connect memory sticks and MP3 players to the connector. Hard disks, USB hubs, etc. do not work with this connector. |
| t
| The maximum current consumption of the USB storage device must not exceed 2.5 watts (500 mA/5 V). |
| t
| Never insert metal objects into the USB connector. This may cause a short circuit and damage the unit. |
| t
| If the unit does not recognise the storage device within 15 seconds, remove the device and insert it into the USB connector again. |
| t
| In some MP3 players, you must press a button to establish a USB connection. Consult the MP3 player Owner's Manual. |
| t
| The temperature range of the use of USB memory sticks and MP3 players usually lies between 0°C and 40°C. For this purpose, customers must be recommended not to leave the memory storage devices in the vehicle over longer periods. |
|
|
|
