SEAT Workshop Service and Repair Manuals > Leon Mk1 > Vehicle electrics | Vehicle electrics | Lights, lamps, switches outside

Removing and installing fog light bulb

–	Switch off ignition and all electrical loads, and pull out ignition key.

–	Place the vehicle on an elevator.

–	Remove the front section of the wheel housing lining (do not remove the wheel) → Bodywork, exterior fitting work; Rep. gr.50.

–	Unlock and remove the electric connector.

–	Turn the bulb holder -1- in the direction of the -arrow- and remove from the fog light.

The bulb for the fog light is fixed in the bulb frame and cannot be replaced separately.

Fog light bulb: H11 12 V, 55 W

Installing:

Install in the same way but in reverse order of removal. When doing this, note the following:

–	Check operation of fog light.

SEAT Workshop Service and Repair Manuals