seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing bulb for number plate light > < Number plate light

Leon Mk1

Removing and installing number plate light
Removing and installing number plate light
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (assembly wedge -T10039/1-, screwdriver) are used to lever out those components using commercially available masking tape.
Removing:
–  Switch off ignition and all electrical consumers, and remove ignition key.
   
–  Lever left-hand side of number plate light -arrow- out of bumper cover, using a screwdriver.
–  Pull number plate light out of bumper cover, taking connected wire lengths into account.
  N94-12160
–  Turn bulb holder -1- in -direction of arrow- and pull out.
–  Remove number plate light.
Installing:
Install in the same way but in reverse order of removal. When doing this, note the following:
–  Insert number plate light into bumper cover, starting at right.hand side, and then push it in on the left-hand side, making sure it is latched in place securely.
–  Check function of number plate light.
  N94-12633

Removing and installing bulb for number plate light > < Number plate light