Leon Mk2
| Heating unit: connection and disconnection |
| 1 - | Heat exchanger |
| q | Replacement: remove the instrument panel and the heating unit |
| q | After removing all the cooling fluid must be replaced |
| 2 - | Ridged bolt for metal plate |
| q | Use when the fitting rim has broken. |
| 3 - | Air distribution housing |
| q | Do not continue to disassemble |
| 4 - | Servomotor for cool/circulating air flap -V113- |
| q | Removing and fitting → Chapter |
| 5 - | Ridged bolt for metal plate |
| 6 - | Cool air fan -V2- |
| q | Removing → Anchor |
| 7 - | Cover |
| 8 - | Ridged bolt for metal plate |
| 9 - | Pre-resistance -N24- |
| q | Removing → Anchor cool air fan -V2-: removing and refitting |
| 10 - | Ridged bolt for metal plate |
| 11 - | Lever for central flap |
| q | Fitting and adjustment → Anchor |
| 12 - | Lever for temperature flap |
| q | Fitting and adjustment → Anchor |
| 13 - | Base plate |
| 14 - | Joint between heat exchanger/dashboard |
| q | Note the fitting position → Anchor |
|
|
|
|