seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Radiator: Removing and installing > < Coolant distribution box with thermostat: removing and fitting

Leon Mk2

Removing and installing radiator fanV7 and radiator fan 2V177
Removing and installing radiator fan -V7- and radiator fan 2 -V177-
t  Removing → Anchor
t  Installing → Anchor
t  Tightening torques → Anchor
Removing
–  Remove engine cover panel → Chapter.
   
–  Loosen the top securing bolts of the air vent guard -arrows-.
  A19-0473
–  Unscrew the securing bolts -arrows- and remove the engine soundproofing..
  N10-10175
–  Disconnect the connector -1-, and loosen the bottom securing bolts of the air vent -arrows-.
–  Remove air vent downwards.
  A19-0473
–  Disconnect the electrical connection -1-, and set the cables aside.
–  Unscrew nuts -arrows- and remove fan.
Installing
Installation is carried out in the reverse order; noting the following in the process:
Tightening torques:
  A19-0475
Qty.Nm
Radiator fan to air vent10
Cowling to radiator5

   

Radiator: Removing and installing > < Coolant distribution box with thermostat: removing and fitting