seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Control unit and hydraulic unit: removing > < ABS TRW (ABS/EDL/TCS/ESP)

Leon Mk2

Connecting brake lines from brake master cylinder to hydraulic unit
Connecting brake lines from brake master cylinder to hydraulic unit
   
In the master brake cylinder:
A - Primary piston circuit of the master brake cylinder to hydraulic unit.
 - Marking: Ø 6.5 mm and threaded pipe bolt M 12 x 1
B - Secondary piston circuit of the master brake cylinder to hydraulic unit.
 - Marking: Ø 6.5 mm and threaded pipe bolt M 12 x 1
  N45-10143
On the hydraulic unit:
1 - Hydraulic unit to front left brake clip
 - Marking: Ø 5.25 mm and short threaded pipe bolt M 12 x 1.
2 - From hydraulic unit to rear right brake caliper.
 - Marking: Ø 5.25 mm and threaded pipe bolt M 10 x 1
3 - From hydraulic unit to rear left brake caliper.
 - Marking: Ø 5.25 mm and short threaded pipe bolt M 12 x 1.
4 - Hydraulic unit to front right brake clip
 - Marking: Ø 5.25 mm and threaded pipe bolt M 10 x 1
5 - Hydraulic unit to brake master cylinder (primary piston circuit)
 - Marking: Ø 6.5 mm and threaded pipe with long thread M 12 x 1
6 - From the hydraulic unit to primary piston circuit of the master brake cylinder
 - Marking: Ø 6.5 mm and threaded pipe with long thread M 12 x 1
  N45-10144

Control unit and hydraulic unit: removing > < ABS TRW (ABS/EDL/TCS/ESP)