| Checking pressure too high at rear axle: |
| –
| Loosen the draft spring. |
| Checking pressure too low in rear axle: |
| –
| Tighten the draft spring. |
Note | Do not adjust with brake pedal depressed, thus the following order should be observed: |
| –
| Release the brake pedal. |
| –
| Adjust the draft spring. |
| –
| Depress the brake pedal again. |
| –
| Read values and if necessary correct adjustment. |
| –
| Place the block on the brake pedal. |
| –
| Remove the pressure gauge. |
|
|
|
