seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing brake servo

Leon Mk2

Removing
Removing
–  Reduce the pressure in the servobrake by pressing on the brake pedal several times.
–  Remove the master brake cylinder → Chapter.
   
–  Release the vacuum tube from the servo brake and remove it.
–  Separate connectors of the servo brake, if there are any.
–  Remove the lower trim of the driver's side foot well → Bodywork, interior work; Rep. gr.68.
  Note
After week 45/05 the brake light switch on the support block does not exist.
–  Remove the brake light switch → Chapter .
–  Separate the brake pedal from the servo brake → Chapter.
  A47-0221
–  Unscrew nuts -1-.
–  Remove the servo brake.
  A47-0222

Installing > < Removing and installing brake servo