| –
| Note or request radio code on vehicles with coded radio if necessary. |
| –
| Disconnect and remove battery. |
| –
| Pull connector off brake fluid level switch. |
| –
| Remove coolant expansion tank, pull off plug and swing to side. |
| –
| Disconnect vacuum hose from brake servo. |
| –
| Unbolt both mountings of the clutch cable. |
| Vehicles with ABS or ABS/EDL |
| –
| Remove control unit and hydraulic unit → Chapter. |
| Vehicles without ABS or ABS/EDL |
| –
| Disconnect brake pipes on brake master cylinder and seal brake pipes with plugs from repair kit -1H0 698 311 A-. |
| Continued for all vehicles |
| –
| Remove trim below dash panel. |
| –
| Remove brake light switch. |
| –
| Remove brake pedal switch -F47-. |
| –
| Separate brake pedal from brake servo → Chapter. |
| –
| Guide brake servo with brake master cylinder out forwards and remove. |
|
|
|
