seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Detaching and attaching the front wheel bearing > < Wheel bearing assembly: disassembly and assembly|Fitting

Leon Mk2

Torque settings
Torque settings
–  Secure the suspension strut to the bearing housing.
Hexagonal nut → Item (bolts on the previous marks).
–  Take the steering rod head from the steering lever
Sechskantmutter → Item.
–  Bolt the revolution sensor → Item to the bearing housing.
Allen bolt → Item.
   
–  Screw a new self locking nut onto the ball joint → Item, immobilizing with the allen key (5)
1 - Allen key (5), shortened approximately 10 mm.
2 - Gear fork spanner -SAT 8010/18A-
3 - Torque wrench -SAT 8010-
  Note
Ensure that the dustcover is correctly fitted without twisting or damaging it.
–  Replace the cover plate .
Hexagonal nut → Item.
–  Fit brake disks.
Star-head bolt → Item.
–  Fit the brake back plate with brake caliper: →  Brake system; Rep. Gr.46.
–  Fit the wheel.
Tightening torque of bolts:110 Nm
–  Replace the dodecagonal nut of the half-shaft and tighten it → Chapter.
  V40-1322

Detaching and attaching the front wheel bearing > < Wheel bearing assembly: disassembly and assembly|Fitting