Leon Mk2
| Steering column, steering mount: assembly overview |
Note| t | No welding or straightening work is allowed on the elements of the steering system. |
| t | Always replace self-locking nuts and bolts. |
| t | Always replace corroded bolts/nuts. |
| Remove and fit the steering column with the steering mount → Chapter. |
| Disassemble and assemble the steering mount and the steering column → Chapter |
| 1 - | Support |
| 2 - | Pressure ring |
| q | With washer incorporated |
| 3 - | Steering lock housing |
| q | Removing and fitting the lock cylinder: → Electric system; Rep. Gr.94 |
| 4 - | Combination switch in steering column |
| q | Repairs: → Electrical system; Rep. Gr.94 |
| 5 - | Upper pressure spring |
| 6 - | Multiple cog adapter socket |
| q | Releasing → Chapter |
| q | Insertion → Chapter |
| 7 - | Collar nut |
| q | 50 Nm |
| 8 - | Allen bolt |
| q | 10 Nm |
| 9 - | Lock socket |
| 10 - | Washer |
| 11 - | Rupture bolt |
| q | Tighten until the head is cut |
| q | To remove drill |
| q | Use protection glasses |
| 12 - | Intermediate plate |
| 13 - | Hexagonal nut |
| q | Left hand side thread |
| q | 8 Nm |
| 14 - | Lock plate |
| 15 - | Left direction bolt |
| q | 22 Nm |
| q | Move the operation lever to the upper limit |
| q | After tightening, fit the securing plate |
| 16 - | Intermediate plate |
| 17 - | Steering mount |
| 18 - | Lower spring |
| 19 - | Self locking nut |
| q | 30 Nm |
| q | Replace |
| 20 - | Bolt |
| 21 - | Half shaft for the steering column |
| 22 - | Nut with retainer |
| q | Always replace |
| q | Use a self locking nut as in position → Item. |
| 23 - | 30 Nm |
| 24 - | Steering column |
| q | Removal: remove upwards from the steering mount |
| q | Check the length → Anchor |
| 25 - | Activation rod |
| 26 - | Bracket |
| 27 - | Spring |
| 28 - | Bracket |
| q | Before fitting, cover the side surfaces with paste -MoS2-. |
