Ribbed belt driven compact alternator

Make

SEAT

Model

Leon Mk2

Section

Electrical system › Starter-current supply-CC › Ribbed belt driven compact alternator

Vehicle electricsRibbed belt driven compact alternator

Ribbed belt driven compact alternator Beginning from the 2000 models modified alternators are installed with differences in shape and also in the designation of the connection terminals. The exterior differences to date between the new compact alternators compared to the previous ones are the following: t  Modified voltage regulator t  Oval shaped housing with a round joint for the double connector, compared to the polygon shaped double connector which was used until now t  Modified designation of the connection terminals → Current flow diagrams, Electrical fault finding and Fitting locations Attachment of cable B+ to the alternator   Note! t  The fixation of the + cable of the alternator is labelled B1+. t  If cable B1+ is not tightened using the torque indicated, the following may occur: –  The battery will not be fully charged. –  Total malfunction of the electrical system and electronics of the vehicle (car immobilized). –  Fire hazard due to sparks. –  Deterioration caused by overloading of electronic parts and control units.

Valeo alternator Securing nut for the cable B1+ -arrow-. Tightening torque: 15 Nm

Diagram not available

Bosch alternator Securing nut for the cable B1+ -arrow-. Tightening torque: 15 Nm

Diagram not available

06 General