The final control diagnosis is part of the electrical check. The following components can be checked via the final control diagnosis: |
t
| Coolant temperature gauge |
t
| Coolant temperature/coolant shortage indicator warning lamp |
t
| Reserve fuel warning lamp -K105- |
t
| Display (odometer, multifunction indicator) |
t
| 4 °C temperature warning lamp -K108- |
t
| 0 °C temperature warning lamp -K107- |
t
| Oil pressure warning lamp -K3- |
t
| Washer fluid low warning lamp -K106- |
t
| Oil pressure warning buzzer (buzzer and gong -H3-). |
Note! t
| If the self-diagnosis detects a fault, check wiring and connections to dash panel insert before renewing dash panel insert. |
t
| Replace the dash panel wiring harness if it is found to be defective when the line positions are checked. The dash panel wiring harness must not be repaired. |
t
| If the dash panel insert is renewed the control unit with display must be coded in the new dash panel insert → Chapter |
|
|
|