Fabia Mk1
Summary of components of door handle and door lock |
1 - | Door lock |
q | the door lock can only be removed together with the assembly carrier |
q | removing and installing → Chapter |
2 - | Control cable |
q | serves to release the lock |
3 - | Mounting bracket |
q | screwed and riveted to the door lock |
4 - | Clamp |
q | Removing: |
l | Door handle, lock cylinder housing and assembly carrier have been removed. |
– | Remove screw Pos. 5 push the clamp slightly back and remove from door. |
q | Installing: |
– | Installation is carried out in the reverse order. |
5 - | 5 Nm |
6 - | Door handle with base |
q | removing and installing → Chapter |
7 - | Cap |
8 - | Lock cylinder housing |
q | removing and installing → Chapter |
9 - | Base |
10 - | Screw |
q | Releasing this screw unlocks the catch of the lock cylinder housing Pos. 8 and the lock cylinder housing can then be removed from the clamp Pos. 4. |
q | Do not tighten screw without the lock cylinder housing being in position. The catch could fall inside the door. |
11 - | 3 Nm |
q | for vehicles 09.00 ? |