Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing side airbag units >
< Removing and installing passenger airbag unit
Fabia Mk1
Body
Body Work
Passenger protection
Airbag
Removing and installing a side airbag crash sensor
Removing and installing a side airbag crash sensor
Removing and installing a side airbag crash sensor
WARNING
Safety regulations should be observed when handling the airbag units
→ Chapter
.
Additional operations should be carried out after the battery earth strap has been disconnected and connected
→ Electrical System; Rep. Gr.27
.
Removing
–
Remove front seat
→ Chapter
.
–
Remove the entrance plate
→ Chapter
.
–
Roll up carpet at the front of the B-crossmember.
–
Unplug connector
-1-
.
–
Release screws
-3-
of the crash sensor
-2-
.
Install
Installation is carried out in the reverse order.
–
Switch off the ignition before attaching the battery.
WARNING
Nobody should be in the vehicle when the battery is being connected.
Tightening torque
Component
Tightening torques
Crash sensor to body
9 Nm
Body
Body Work
Passenger protection
Airbag
Removing and installing a side airbag crash sensor
Removing and installing side airbag units >
< Removing and installing passenger airbag unit