skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the convenience system central control unit > < Removing and installing centre dash panel

Fabia Mk1

Removing and installing the central tube/dash panel
Removing and installing the central tube/dash panel
Removing the central tube/dash panel
  Note
The work sequence may differ slightly on individual models depending on the equipment version.
–  Removing dash panel → Chapter.
–  Removing vent for windscreen and dash panel vents in centre, on driver's and front passenger's side → Heating and Air Conditioning; Rep. Gr.80.
–  Removing the footwell vent → Heating and Air Conditioning; Rep. Gr.80.
–  Release all necessary earth connections and all wiring loom retaining clips.
–  Remove relay carrier → Electrical System; Rep. Gr.97.
   
–  Remove fixing screws for heater module carrier -arrows- (12 Nm).
  S70-0234
–  Remove screws -arrows- for dash panel support (4 Nm).
–  Removing the fixing screws for the steering column on the central tube of the dash panel → Running Gear; Rep. Gr.48.
  S70-0235
–  Remove fixing screws for central tube/dash panel -arrows- (12 Nm).
Installing the central tube/dash panel
Installation is carried out in the reverse order.
  S70-0236

Removing and installing the convenience system central control unit > < Removing and installing centre dash panel