Fabia Mk1
| Summary of components of pressure line (hose) - power steering TRW - RHD version |
| In the figure, the hose is illustrated at an engine pump aggregate of the TRW. The hose is identical for the engine pump aggregate of KOYO |
| 1 - | Engine pump aggregate |
| q | with noise encapsulation, assignment → Electronic Catalogue of Original Parts |
| q | with half noise encapsulation, assignment → Electronic Catalogue of Original Parts |
| q | without noise encapsulation, assignment → Electronic Catalogue of Original Parts |
| 2 - | Return line (return hose) |
| q | Assignment → Electronic Catalogue of Original Parts |
| q | must not be pinched off during disassembling work |
| q | No less than minimum bending radius of 100 mm |
| q | removing and installing → Chapter |
| 3 - | Line holder |
| 4 - | Power-steering gear |
| 5 - | Pressure line (expansion hose) |
| q | Assignment → Electronic Catalogue of Original Parts |
| q | must not be pinched off during disassembling work |
| q | No less than minimum bending radius of 100 mm |
| q | Pay attention to installation position relative to subframe → Chapter |
| q | removing and installing → Chapter |
| 6 - | Spacer holder |
| q | clipped onto body |
| 7 - | Cable of power-assisted steering sensor -G250- |
| q | power-assisted steering gear - engine pump aggregate |
|
|
| Tightening torques: |
Pressure line to the power-assisted steering gear (TRW)
| 35 Nm | ||
| Pressure line to the power-assisted steering gear (KOYO) | 40 Nm |
